State-of-the-art technology and the strictest quality standards are reflected in the brilliance, economical consumption, and excellent workability of our powder gold. Powdered silver is used both in restoration work and in technical applications (e.g., in aerospace technology). Powder gold in flake form, particle size < 45 μm. Powder gold flakes and powder silver flakes are applied to the special adhesive base for powder gold, “Kölner Permacoll P,” either using a dry spray applicator (for economical use) or with a brush (for dusting). Weather-resistant gilding offers advantages over traditional leaf gilding, especially in the case of deep undercuts or very small objects. Application: The adhesive base “Kölner Permacoll P” is applied generously with a synthetic hair brush and immediately dusted with powder gold. It is recommended to coat only small areas at a time. After drying, all fine details of the substrate become visible again. Even the finest engravings are preserved. The open time is very short, enabling fast working. After a drying time of 24 hours, the powder gilding can be burnished with an agate polishing stone to smooth the surface and adjust the level of gloss. A matte-to-gloss finish is therefore possible. Gilding with powder gold is significantly more scratch-resistant than leaf gilding and, from 23 karats, weather-resistant. Available in 1 g, 2 g, 5 g, or 10 g packages. Special packaging sizes and custom colors available upon request.  

Adhesive for powder gold, suitable for the interior and exterior field. Permacoll Base P is applied with a soft brush. Depending on the thickness of the coating and environmental conditions, powder gold can be applied to the sticky film after approx. 15-60 minutes. Gilding in the interior can be burnished with agate stones. The workpiece has to be coated with 2 layers of Kölner KGGG Fond, before gilded and burnished.The surface can be burnished after 24 hours.Available packaging unit: 100 ml, 500 ml, 1.000 ml