Informations for using Poliment Powder in quick form:1. Poliment-Powder has to be premixed with water(Stir well and wait ca. 30–60 minutes. Then stir up well again and the premix is ready.)2. Prepare Rabbit Skin Glue:250 g. Water + 10 – 14 g. of glue3. Combined premixed polimentpowder with prepared rabbit skin glue.By the colours yellow and white: 12,4 / 10,5 g. of 25 g. prepared glueThen all other steps are following: applying poliment, drying and smoothing, applying gold leaf and polishing. As you know with Shellac.INFORMATION:All information and advises we do to our best knowledge and according to our experience and tests. This information is not binding and exclude us from all liability. Due to the variety of materials and conditions the user has to adjust the products to the respective material to his own responsibility.Our information includes legislation and product requirements, especially such as those resulting from further development and improvement. We are not liable for any damages happening by using products carelessly or improperly. Safety data sheet on request.Available colours: Oxyd red, Yellow, Black, WhiteAvailable packaging unit: 250 gram, 500 gram, 1000 gram

  Poliment Selhamin Dry, available in solid form as cones. Under traditional procedure, specially prepared and refined bole for the priming of gilded surfaces. It is an unbound (unprepared) poliment. Available colours:Piedmont oxyd red, yellow, black, grey, blue, whiteAvailable packaging unit: 1 kg  

  Synthetic and ready to use Polishing Ground Powder for an easier and time-saving water-gilding. Advantage of this system is better dosage according to your requirements and the shelf life. Compared to commercially available burnishing clay (wet or dry), the Polishing Ground needs no paste application. The gilding requires some expert knowledges, skill and practice. For those who do not have the experience in this gilding technique, this kind of system were specially developed. Gerstendörfer Polishing Ground Powder will be mixed in the ratio 1:1 with distilled water. After a short rest, the polishing ground can be applied (in cold state) with a soft brush.Available colours: Oxyd red, Yellow, Black, WhiteAvailable packaging unit: 150 gram, 300 gram  

  The poliment filter is used to make poliment. It can be held in impurities and clumping. The poliment filter is used for the processing of plastic. Impurities and lumps can be filtered out. The diameter of the sieve insert is approx. 4 cm and the mesh size is below 100 μm.  

  Aperture size of sieve insert approx. 100 µm; diameter approx. 4 cm.